Page
12
/
30
EN – Original instructions
I. Parts List
II. Characteristics
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
I. PARTS LIST
See Fig. 1
II. CHARACTERISTICS
See Table 1
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in fire and/or serious
injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using power tools, basic safety precautions should always be followed to
reduce the risk of fire and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols
(
Explanation of symbols appearing on the tool, if applicable).
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements
CE Conformity
CAUTION! Fire hazard
Do not smoke or approach an open flame while using the machine or when filling
the tank with oil or gasoline.
Never start the machine near flames or sparks.
Oil / gasoline is flammable and may explode.
CAUTION! Hot surface
Do not tourch the engine surface or exhaust with bare hands when the engine is
running or immediately after stop.
Only use the product outdoors or in a well-ventilated area. Never start or run the
engine in an enclosed area. The exhaust emissions may contain toxic carbon
monoxide (CO), which may cause serious injury or death.
Danger of moving parts.
Keep persons (esp. children) and animals away from product and working area.
Risk of flying debris (e.g. small debris).
Keep bystanders at a safe distance (at least 15m) away from the tool while in
operation.
Wear eye and hearing protection.
Wear a mask.
