30
Printer
Shows the Printer model connected, only adjust this if you have multiple
printers connected
Speed
For most printing, use full speed (3 IPS), sometimes slowing down the print
may improve the print quality of metallic foils
Adapter
Plus/ TT Printers are available with sever-
al narrow and multi-adaptors.
Using an adapter:
1.
Create your design as normal selecting the appropriate ribbon width
2.
Install the adapter and load the ribbon (s)
3.
Select the adapter you are using in the dropdown
4.
In the adapter configuration, select “enable print” for each groove that
has been loaded with a ribbon
5.
Press Print, your design will be replicated on each of the ribbon
6.
If the print is not aligned, adjust the adapter settings to get perfect
alignment
