RIB JOLLY ONE AA00200, Руководство пользователя

Страница: 22 / 40

22
JOLLY ONE without limit switches
=
IMPORTANT
SPRINGS
JOLLY ONE with limit switches
=
IMPORTANT
3 wires cable to connect the two operators
4
ROLLING SHUTTER WITH LENGHT SHAFT OVER 4 m
In this case we suggest to mount 2 JOLLY ONE on the same shaft at the shutter extrimities.
It is necessary to eliminate the limit switch of one of the 2 JOLLY ONE and connect in parallel
the two motors.
IMPORTANT:
Before fixing the two pulleis to the shutter laminate (4), verify that the sense
of rotation of the 2 JOLLY ONE is the same.
ATTENTION:
Avoid all the manouvres of the motor really not necessary during
the regulation. Many manouvres at the same time cause the
intervention of the thermal sensor.
5
REGULATION OF THE LIMIT SWITCH WHICH STOPS THE DOWNWARD MOVEMENT
6
REGULATION OF THE LIMIT SWITCH WHICH STOPS THE UPWARD MOVEMENT
7
When there is too little
travel tighten F1
When there is too much
travel unscrew F1
When adjustement is complete
tighten the 2 blocking screw
Ground Ground Ground
When there is too little
travel unscrew F2
When there is too much
travel tighten F2
When adjustement is complete
tighten the 2 blocking screw
G
B