RIB JOLLY ONE AA00200, Руководство пользователя

Страница: 20 / 40

20
G
B
TECHNICAL DATA / INSTALLATION JOLLY ONE
ROLLING GATE CONTROL
The European Standard EN 12604 “Industrial, Commercial and Garage Doors and Gates -
Mechanical Aspects - Requirements”, at the point 4.3. “Protection against unintentional and
uncontrolled movements” requires also that*:
a - The vertically operating door leaves shall be balanced so that the door leaf can stop
in any position, or that the out-of-balance state shall not produce, in any case, a
static force at the primary closing edge of the door exceeding 150N (15,3 kg / 33,70
lbs). Verify it after having manually released JOLLY ONE operator.
b - If a spring fails, the resulting out-of-balance static force occurring at the primary
closing edge of the roller shutter shall not exceed 200N (20,4 kg / 44,94 lbs),
even when JOLLY ONE operator is manually released. After this failure, you must
intervene on the door to substitute the broken spring and correct the balance state.
Therefore, we suggest you to fraction the roller shutter weight with an adequate
number of springs (*This is a free interpretation).
WARNING: The EN 12445 standard ´Industrial, commercial and garage doors and gates
- safety in use of power operated doors - test methods´ at point 4.1.2 ´safeguarding
against hazard of being lifted´ provides that the rolling gate shall not be able to lift
more than 20 kg/44lbs.
In order to meet this standard, RIB suggests to install the control board with electric
power regulation J-CRX (cod. ABJ7080).
Measurements in mm/in
1 - JOLLY ONE operator
2 - Photoelectric cells (external)
3 - Push-Button 4 - Key selector
5 - Tuned aerial
6 - Flashing lamp
I
N ORDER TO ENSURE A CORRECT FUNCTION ONLY RIB’S
COMPONENTS MUST BE USED
371 / 14,6
Ø 60 / 2,36
Ø 205 / 8,07
Parts to install meeting the EN 12453 standard
COMMAND TYPE
USE OF THE SHUTTER
Skilled persons
(out of public
area*)
Skilled persons
(public area)
Unrestricted use
with manned operation A B -
with visible impulses
(e.g. sensor)
C or E C or E C and D, or E
with not visible impulses
(e.g. remote control device)
C or E C and D, or E C and D, or E
automatic C and D, or E C and D, or E C and D, or E
* a typical example are those shutters which do not have access to any public way.
A: Command button with manned operation (that is, operating as long as activated),
like code ACG2012.
B: Key selector with manned operation, like code ACG1010.
C: Motor force regulation.
D: Safety edges or Sensor able to detect an obstacle and/or other safety devices to
keep thrust force within the limits of EN12453 regulation - Appendix A.
E: Photoelectric cells, eg. code ACG8026 (To apply on the whole height of the door up
to max 2,5 m as indicated on EN 12445 point 7.3.2.2).
TECHNICAL DATA
JOLLY ONE
Max gate weight kg/lbs 220/485
Max gate surface m 2 16
Limit switch winding capacity N. rotat. 8,5
Nominal functioning torque Nm 150
Max operating torque Nm 110
Max lifting force from earth kg/lbs 150/330
Max operating force kg/lbs 110/242
Pulley revolutions rpm 10,4 (50Hz) - 13,4 (60Hz)
Pulley diameter mm/in 200/7,9 - 220/8,67 with adapter ACJ9055
Shaft diameter mm/in 60/2,3 - 42/1,64 with adapter ACJ9040 - 48/1,9 with adapter ACJ9050
EEC Power supply 230V ~ 50-60Hz 120V ~ 60Hz
Motor capacity with load W 570 (50Hz) - 550 (60Hz) 460
Power absorbed with load A 2,7 (50Hz) - 2,6 (60Hz) 4,2
Capacitor µF 20 60
Functioning cycles N. 5 - 20s/2s
Daily operations suggested N. 20
Service 30%
Nominal functioning time s 240 420
Motor weight kg/lbs 9,5
Working Temperature °C -10 ÷ +55
Protection IP 30