RHOSS TCCEY 114, Инструкция по эксплуатации

Страница: 25 / 84

SECTION II : INSTALLATION AND MAINTENANCE
25
KRS485
– Logic dialogue serial RS485 interface with building
automation and supervisory systems (Supported protocols: owner
protocol; RTU Modbus
®
).
KFTT10
– Serial FTT10 interface to connect to LonWorks
®
compatible
protocol supervisory systems.
KRS232
– RS485/RS232 serial converter to connect to supervisory
systems and must be associated to one or more KRS485 serial
interface modules in the case of centralised unit management.
KUSB
– RS485/USB serial converter to connect to supervisory systems
and must be associated to one or more KRS485 serial interface
modules in the case of serial unit management.
KRAS
– Intake anti-vibrating fitting
KRMA
– Flow anti-vibrating fitting
Description and fitting instructions are supplied with each
accessory.
II.3 TRANSPORT - HANDLING AND STORAGE
DANGER!
The unit must be transported and handled by
skilled personnel trained to carry out this type of
work.
SAFEGUARD THE ENVIRONMENT!
Dispose of the packaging materials in compliance
with the national or local legislation in force in your
country. Do not leave the packaging within reach of
children.
IMPORTANT!
Be careful to prevent damage by accidental
collision.
II.3.1 PACKAGING COMPONENTS
DANGER!
Do not open or tamper with the packaging before
installation.
The units must only be moved and lifted by
specialised personnel who are trained to do so.
Bring the machine to the installation site with packaging intact using a
forklift truck or hand truck, making sure it is not off centre (position of
symbol approximate, always check stability).
The units are supplied inside a cardboard box on top of a wooden pallet
secured with 4 screws and strapped.
Each unit is supplied complete with:
 User instructions
 wiring diagram
 list of authorised service centres
 warranty document
 safety valve certificates
 safety valve, fan and pump or circulator use and maintenance
manuals.
II.4 HANDLING GUIDELINES
DANGER!
An off-centred barycentre could cause sudden and
hazardous movements. Movement of the unit must
be performed with care, in order to avoid damage to
the external structure and to the internal
mechanical and electrical components.
Also make sure that there are no obstacles or
people along the route, in order to prevent the risk
of impact, crushing or tipping the lifting device.
TCCE
–
THCE
114
÷128
X Y
Y X
G
G
G
G
TCCE
–
THCE
114
÷128T-H
Fig.5
Approximate centre of gravity position.
X Y Weight (*)
MODEL
(cm) (cm) kg
TCCEY 114
56,5 28,0 260
TCCEY 117
55,0 26,5 280
TCCEY 121
65,0 31,2 350
TCCEY 126
65,0 31,0 370
TCCEY 128
65,0 31,0 370
THCEY 114
56,5 28,0 280
THCEY 117
55,0 26,5 290
THCEY 121
65,0 34,2 370
THCEY 126
65,0 34,0 380
THCEY 128
65,0 34,0 380
TCCEY 114 T-H
62,0 25,6 350
TCCEY 117 T-H
61,0 27,1 370
TCCEY 121 T
73,5 32,0 440
TCCEY 126 T
73,0 32,2 470
TCCEY 128 T
73,0 32,2 470
THCEY 114 T-H
57,0 27,1 360
THCEY 117 T-H
62,0 26,6 380
THCEY 121 T
73,0 34,0 450
THCEY 126 T
72,5 34,2 480
THCEY 128 T
72,5 34,2 480
(*)
Weight of packaged unit with storage empty.