RHINO RHD62 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 152

RHINO RHD62 Скачать руководство пользователя страница 94

OPERATION

RHD 02/11

Operation Section 4-4

© 2011 Alamo Group Inc.

OPERA

T

ION

The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.

(SGM-14)

2.OPERATOR REQUIREMENTS

Safe operation of the unit is the responsibility of a qualified operator. A qualified operator has read and under-

stands the implement and tractor Operator’s Manuals and is experienced in implement and tractor operation

and all associated safety practices. In addition to the safety messages contained in this manual, safety signs

are affixed to the implement and tractor. If any part of the operation and safe use of this equipment is not com-

pletely understood, consult an authorized dealer for a complete explanation.

If the operator cannot read the manuals for themselves or does not completely understand the operation of the

equipment, it is the responsibility of the supervisor to read and explain the manuals, safety practices, and

operating instructions to the operator.

Safe operation of equipment requires that the operator wear approved Personal Protective Equipment (PPE)

for the job conditions when attaching, operating, servicing, and repairing the equipment. PPE is designed to

provide operator protection and includes the following safety wear:

PERSONAL PROTECTIVE EQUIPMENT (PPE)

•

Always Wear Safety Glasses

•

Hard Hat

•

Steel Toe Safety Footwear

•

Gloves

•

Hearing Protection

•

Close Fitting Clothing

•

Respirator or Filter Mask (depends on operat-
ing conditions)

OPS-U- 0002

«
...
92
93
94
95
96
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов