RHINO RHD62 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 152

RHINO RHD62 Скачать руководство пользователя страница 27

SAFETY

RHD 02/11

Safety Section 1-21

© 2011 Alamo Group Inc.

SAFETY

DANGER! - Keep Away - Thrown Objects. Inspect
area before mowing. Do not let rotating blades
contact solid objects. Operate only if all Guards -
Deflectors are in place.  Do not operate with Mower
or Wing raised off the ground. Stop mowing if
Passerby enter the area. Stay away from rotating
blades.  Keep hands and feet away from rotating
blades.  Do not approach mower until all movement
has stopped.

P/N 02967668

WARNING! Failure to use and maintain shields
and deflectors in good condition may lead to injury
or death from entanglement with rotating parts.
being hit by objects thrown with great force by
blades, or by blade contact.

P/N 00725739

WARNING! Do not operate with Belt Shield
removed. Finger(s) may be pinched off if get caught
between V-Belt and Pulley.

P/N 00758194

WARNING! Avoid Bodily Injury, Use 540RPM PTO
Speed Only.

P/N D103

«
...
25
26
27
28
29
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов