RHINO RHD62 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 152

RHINO RHD62 Скачать руководство пользователя страница 106

OPERATION

RHD 02/11

Operation Section 4-16

© 2011 Alamo Group Inc.

OPERA

T

ION

9.1 Tractor Pre-Operation Inspection/Service

Refer to the tractor operator’s manual to ensure a
complete pre-operation inspection and scheduled
service is performed according to the
manufacturers recommendations. The following
are some of the items that require daily service and
inspection:

•

Tire condition/air pressure

•

Wheel lug bolts

•

Steering linkage

•

PTO shield

•

SMV sign is clean and visible

•

Tractor’s lights are clean and functional

•

Tractor Seat belt is in good condition

•

Tractor ROPS is in good condition

•

ROPS is in the raised position

•

No tractor oil leaks

•

Radiator free of debris

•

Engine oil level and condition

•

Engine coolant level and condition

•

Power brake fluid level

•

Power steering fluid level

•

Fuel condition and level

•

Sufficient lubrication at all lube points

•

Air filter condition

OPS-U-0030

9.2 Mower Pre-Operation Inspection/Service

Before each mower use, a complete inspection and service is required to ensure the mower is in a good and
safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To
ensure the mower is ready for operation, conduct the following.

OPS-R-0007

All Safety Shields, Guards and Safety devices including (but not limited
to) - the Deflectors, Steel Guards, Gearbox Shields, PTO integral
shields , and Retractable Door Shields should be used and maintained

in good working condition. All safety devices should be inspected carefully at least daily
for missing or broken components. Missing, broken, or worn items must be replaced at
once to reduce the possibility of injury or death from thrown objects, entanglement, or
blade contact.

(SFL-5)

Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,

WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR

OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY

CAUSE SERIOUS INJURY FROM THROWN BLADES.

(SGM-10)

«
...
104
105
106
107
108
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов