RHINO RHD62 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 152

RHINO RHD62 Скачать руководство пользователя страница 105

OPERATION

RHD 02/11

Operation Section 4-15

© 2011 Alamo Group Inc.

OPERA

T

ION

9. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided.

OPS-U-0029

Always disconnect the main PTO Driveline from the Tractor before performing service on

the Mower. Never work on the Mower with the tractor PTO driveline connected and

running. Blades or Drivelines could turn without warning and cause immediate

entanglement, injury or death.

(SRM-3)

Always disconnect the main PTO Driveline from the Tractor before performing service on

the Mower. Never work on the Mower with the tractor PTO driveline connected and

running. Blades or Drivelines could turn without warning and cause immediate

entanglement, injury or death.

(SRM-3)

DO NOT

allow any person under a folded wing unless wing is securely

locked up or supported.

DO NOT

approach the Implement unless the

Tractor is turned off and all motion has ceased. Never work under the

frame work, or any lifted component unless the implement is securely

supported or blocked up. A sudden or inadvertent fall by any of these

components could cause serious injury or even death.

(STI-03)

Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order.

(SG-21)

«
...
103
104
105
106
107
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов