manualshive.com logo in svg

RHINO RHD62, Руководство оператора, Страница: 142 / 152

Поделиться
Скачать
RHINO RHD62 Скачать руководство пользователя страница 142

MAINTENANCE

RHD   02/11

Maintenance Section 5-12

© 2011 Alamo Group Inc.

MAINTENANCE

Changing Rotation of Cuttershaft

Standard shaft rotation is forward rotation as shown in the 

Figure ASM-FL-0072. 

To reverse cuttershaft

rotation, the wing drive gearbox must be flipped over 180 degrees and the center mower drive components
moved to the opposite side. When changing rotation of cutteshafts (course cut only) knife pins on wing mower
sections must be reinstalled in opposite direction.

Center Cuttershaft Rotation Reversal

1.

To reverse direction of cuttershaft rotation,

three left hand parts must be ordered: belt
guard, outboard bearing plate and an idler
pulley arm. A front trash deflector is also
required. Refer to the parts section of this
manual for part numbers and ordering
information.

2.

With the mower housing securely blocked up,

remove cuttershaft and turn 180 degrees.

3.

Remove gearbox cuttershaft drive pulley and

outboard bearing plate. Attach new mounting
plate to opposite side of mower housing.

4.

Remove four gearbox bolts and rotate gearbox

180 degrees to new position.

5.

Install Cuttershaft pulley, gearbox output pulley,

idler arm pulley assembly, and belt on housing
right side.

6.

Attach new belt guard.

Wing Cuttershaft Rotation Reversal

1. Remove skid plate, front cover plate and front

shield.

2. Loosen powerband belt tensioner and remove

powerband belt from gearbox sheave.

3. Remove four gearbox bolts and remove

gearbox.

4. Change positions of gearbox vented plug and

drain plug.

5. Rotate gearbox 180 degrees and re-mount.

6. Replace powerband belt and re-tension.

7. Reattach skid plate, front cover plate and front

shield.

Содержание RHD62

























































































































































Отзывы:

Нет отзывов