RHINO RHD62 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 152

RHINO RHD62 Скачать руководство пользователя страница 107

OPERATION

RHD 02/11

Operation Section 4-17

© 2011 Alamo Group Inc.

OPERA

T

ION

The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.

•

Ensure the manual canister is secured to the
equipment with the operator’s manual inside.

•

Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals.

OPS-U- 0011

•

Check that the main driveline securely attached
to the tractor and the locking collar is seated in
the groove of the PTO Shaft.

•

Inspect that the 3-point hitch pins are the
proper size, correctly installed and secured to
the tractor lift arms with retaining pins inserted.

•

Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.

OPS-F-0015

•

Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.

•

Ensure the rollers are in good condition and
rotate freely.

•

Ensure the driveline integral shield is in good
condition and rotate freely.

•

Inspect that all bolts and screws are in position
and are properly torqued.

OPS-F- 0004

«
...
105
106
107
108
109
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов