RHINO RHD62 Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 152

RHINO RHD62 Скачать руководство пользователя страница 114

OPERATION

RHD 02/11

Operation Section 4-24

© 2011 Alamo Group Inc.

OPERA

T

ION

10.4 Driving the Tractor and Mower

Start off driving at a slow speed and gradually increase your speed while maintaining control of the tractor and
mower. Moving slowly at first will also prevent the tractor from rearing up and loss of steering control. The
tractor should never be operated at speeds that cannot be safely handled or which will prevent the operator
from stopping quickly during an emergency. If the power steering or engine ceases operating, stop the tractor
immediately as the tractor will be difficult to control.

Drive the tractor with the 3-Point lift arms in the raised position and lock the control lever in the transport detent
position to prevent damage to the mower driveline and tongue when turning.

Perform turns with the tractor and mower at slow
speeds to determine how the tractor with an
attached mower handles a turn. Determine the safe
speed to maintain proper control of the tractor when
making turns. When turning with a towed
implement, the overall working length of the unit is
increased. Allow additional clearance for the mower
when turning.

To avoid overturns, drive the tractor with care and at
safe speeds, especially when operating over rough
ground, crossing ditches or slopes, and turning
corners. Tractor wheel tread spacing should be
increased when working on inclines or rough
ground to reduce the possibility of tipping.

Use extreme caution when operating on steep
slopes. Keep the tractor in a low gear when going
downhill. DO NOT coast or free-wheel downhill.

OPS-F- 0018

«
...
112
113
114
115
116
...
»

Содержание RHD62

























































































































































Отзывы:

Нет отзывов