RFL Electronics RFL 9660 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 312

RFL Electronics RFL 9660 Скачать руководство пользователя страница 2

WARRANTY

Except where noted, all RFL Electronics Inc. products come with a one-year warranty from date of delivery for
replacement of any part which fails during normal operation. RFL will repair or, at its option, replace components
that prove to be defective at no cost to the Customer. All equipment returned to RFL Electronics Inc. must have
an RMA (Return Material Authorization) number, obtained by calling the Customer Service Department. A
defective part should be returned to the factory, shipping charges prepaid, for repair or replacement FOB
Boonton, N.J.

RFL Electronics Inc. is not responsible for warranty of peripherals, such as printers and external computers. The
warranty for such devices is as stated by the original equipment manufacturer. If you have purchased peripheral
equipment not manufactured by RFL, follow the written instructions supplied with that equipment for warranty
information and how to obtain service.

WARRANTY STATEMENT

RFL Electronics Inc. products are warranted against defects in material and workmanship for one year from the
date of shipment. During the warranty period, RFL will repair or, at its option, replace components that prove to
be defective at no cost to the customer, except the one-way shipping cost of the failed assembly to the RFL
Customer Service facility in Boonton, New Jersey.

This warranty does not apply if the equipment has been damaged by accident, neglect, misuse, or causes other
than performed or authorized by RFL Electronics Inc.

This warranty specifically excludes damage incurred in shipment to or from RFL. In the event an item is
received in damaged condition, the carrier should be notified immediately. All claims for such damage should be
filed with the carrier.

NOTE

If you do not intend to use the product immediately, it is recommended that it be opened immediately
after receiving and inspected for proper operation and signs of impact damage.

This warranty is in lieu of all other warranties, whether expressed, implied or statutory, including but not limited
to implied warranties of merchantability and fitness for a particular purpose. In no event shall RFL be liable,
whether in contract, in tort, or on any other basis, for any damages sustained by the customer or any other
person arising from or related to loss of use, failure or interruption in the operation of any products, or delay in
maintenance or for incidental, consequential, indirect, or special damages or liabilities, or for loss of revenue,
loss of business, or other financial loss arising out of or in connection with the sale, lease, maintenance, use,
performance, failure, or interruption of the products.

RFL Electronics Inc.

353 Powerville Road

Boonton Township, NJ 07005-9151

RFL 9660

RFL Electronics Inc.

April 24, 2007 ii

(973) 334-3100

«
1
2
3
4
...
»

Содержание RFL 9660

























































































































































































































































































































Отзывы:

Нет отзывов