RFI MA-2080-B, Руководство пользователя, Страница: 6 / 130

RF EXPOSURE AND ELECTRICAL SAFETY
The use of this modem in any other type of host configuration that may not comply with
the RF exposure requirements should be avoided. During operation, a minimum of 20 cm
(8 inches) should be maintained between the antenna, whether extended or retracted,
and the user’s/bystander’s body (excluding hands, wrists, f eet, and ankles) to ensure RF
exposure compliance in accordance with ARPANSA guidelines. The modem is not
designed, nor intended, for use in applications within 20 cm (8 inches) of the body of the
user. Continued operational compliance of the modem relies upon it being used with
an AS/NZS 60950.1 approved SELV power supply.
Cautions
This modem has been tested and found to comply with the limits pursuant to relevant
ACMA Standards. These limits are designed to provide reasonable protection against
harmful interference in an appropriate installation. This modem generates, uses, and can
radiate radio frequency energy and, if not used in accordance with instructions, can
cause detrimental interference to other radio communication networks and devices.
Use only the supplied or approved antenna. Unauthorized antennas, modifications, or
attachments could impair performance, damage the modem, or result in violation of RF
exposure regulations.
There is no guarantee that electromagnetic interference will not occur in a particular
installation. If the modem does cause detrimental interference in radio and television
reception, which can be verified by turning the modem on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
▪
Re-orient or relocate the receiving radio or TV antenna
▪
Increase the separation between the modem and the receiver
▪
Contact RF Industries Maxon Technical Support for assistance.