RFI MA-2080-B, Руководство пользователя, Страница: 37 / 130

DHCP : the WAN interface will be as a DHCP client and acquire
WAN IP from a DHCP server.
Static : the WAN interface will use static IP settings defined,
including device IP, netmask, gateway, and DNS.
PPPoE : the WAN interface will be established by PPP over Ethernet
protocol. Authentication settings will be required for the
connection.
LAN Mode: the working mode as a LAN port.
Bridge : in this mode, the router’s Ethernet ports are acting as a 2 -
port switch. All LAN settings are configured in in ETH1. This is the
default mode for ETH0.
Separate LAN : if Bridge mode is not selected, the ETH0 will be as a
separate LAN interface with different subnet settings.
DHCP Server: Option to enable/disable DCHP sever function on the LAN
port, and the configuration for a DHCP server, such as IP range, Lease
Time, and Doman name.
DHCP MAC Binding: only available when DHCP server is enabled. This is
to bind certain static IP addresses to specific clients based on their MAC
addresses. Up to 20 clients can be added.