Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk
/web/index
6/56
About this documentation
Bosch Rexroth AG
, A6VE Series 63, RE 91606-01-B/07.2013
1.3 Display of information
Standardized safety instructions, symbols, terms and abbreviations are used so that
you can use
this documentation
to work quickly and safely with
your product
. To give
you a better understanding they are explained in the sections below.
1.3.1 Safety instructions
This documentation includes safety instructions in chapter 2.6 "Product-specific
safety instructions" on
page 10
and in chapter 3 "General instructions on damage
to equipment and the product" on
page 13
and before a sequence of actions or
an instruction for action involving a risk of personal injury or damage to equipment.
The described danger prevention measures must be observed.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger
Consequences in case of noncompliance
▶
Measure for danger prevention
▶
<List>
t
Warning sign:
draws attention to the danger
t
Signal word:
identifies the degree of the danger
t
Type and source of danger:
identifies the type and source of the danger
t
Consequences:
describes what occurs if the safety instructions are not complied with
t
Precautions:
states how the danger can be avoided
Table 2: Danger classes in accordance with ANSI Z535.6-2006
Warning sign, signal word
Meaning
DANGER
Identifies a dangerous situation that will result in death or
serious injuries if it is not avoided.
WARNING
Identifies a dangerous situation that may result in death or
serious injuries if it is not avoided.
CAUTION
Identifies a dangerous situation that may result in minor to
moderate injuries if it is not avoided.
NOTE
Damage to equipment: the product or the environment may be
damaged.
