Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699 959
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk
/web/index
32/56 Installation
Bosch Rexroth AG
, A6VE Series 63, RE 91606-01-B/07.2013
Ports intended for connecting lines are covered by protection plugs or threaded
plugs, which serve as transport protection. All ports required for functional
operation must be connected (see Table 12 "Ports A6VE series 63" and Table 13
"Ports A6VE series 63 with integrated counterbalance valve (BVI)" on page 36).
If this requirement is disregarded, malfunction or damage may result. If a port is
not connected, it must be plugged with a threaded plug because protection plugs
are not pressure-resistant.
The setting screws are protected against unauthorized resetting by means of
protection caps. Removal of the protection caps will void the warranty. If you
need to change settings, contact your responsible Bosch Rexroth Service partner
for address, see chapter 10.5 "Spare parts" on page 47.
7.4.8 Hydraulically connecting the axial piston unit
The machine/system manufacturer is responsible for dimensioning the lines. The
axial piston unit must be connected to the rest of the hydraulic system in accordance
with the hydraulic schematic of the machine/system manufacturer.
The ports and fastening threads are designed for the maximum pressure specified in
the data sheet. The machine/system manufacturer must ensure that the connecting
elements and lines correspond to the specified application conditions (pressure,
flow, hydraulic fluid, temperature) with the necessary safety factors.
Connect only hydraulic lines that are appropriate for the axial piston unit port
(pressure level, size, system of units).
