2
Damaged, warped or deformed blades
should not be used.
3. Do not use the saw without guards in
position, in good working order and
properly maintained.
4. Replace the table insert when worn.
5. Connect your mitre saw to a dust
collecting device when sawing.
6. Check the maximum depth of cut.
7. When sawing long workpieces, always
use additional supports and clamping
devices.
8. The operator must be adequately trained
in the operation of mitre saws and their
components.
9. Wear suitable personal protective
equipment when necessary, this could
include:
● hearing protection to reduce the risk
of induced hearing loss;
● eye protection;
● respiratory protection to reduce the
risk of inhalation of harmful dust;
● gloves for handling saw blades
(saw blades shall be carried in a
holder wherever practicable) and
rough material.
10. Make sure there is adequate lighting
provision for your work area.
conditions that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorised service centre unless
otherwise indicated in this instruction
manual. Do not use the tool if the switch
does not turn it on and off.
21. WARNING.
The use of any accessory or
attachment other than one recommended
in this instruction manual may present a
risk of personal injury.
22. HAVE YOUR TOOL REPAIRED BY
A QUALIFIED PERSON.
This electric
tool complies with the relevant safety
rules. Repairs should only be carried
out by a qualified person using original
spare parts, otherwise this may result in
considerable danger to the user.
23. THROUGH POOR CONDITIONS OF
THE ELECTRICAL MAINS,
shortly
voltage drops can appear when starting
the EQUIPMENT. This can influence
other equipment (e.g. blinking of a
lamp). If the MAINS-IMPEDANCE
Zmax < 0.34 OHM, such disturbances
are not expected.
24. DO NOT USE SAW BLADES
MANUFACTURED FROM HIGH
SPEED STEEL.
25. KEEP THE FLOOR AREA AROUND
THE MACHIN LEVEL,
well maintained
and free of loose material e.g. chips
and cutoffs.
26. USE CORRECTLY SHARPENED SAW
BLADES.
Observe the maximum speed
marked on the saw blade. Ensure that
the machine is always fixed to a bench,
whenever possible.
Additional Safety Rules for
Miter Saws
1. This saw is designed for using on
wood and wood-like products. Never
cut metals or masonry products with
this tool.
2.
Select saw blades in relation to
the material to be cut and only use
blades that are recommended by the
manufacturer. Do not use HSS (High
Speed Steel) blades or any other blade
that does not conform to EN847-1.
WARNING!
● Ensure that the arm is securely fixed
when beveling;
● Keep the floor area around the
machine level, well maintained and
free of loose materials e.g. chips and
cut-offs;
●
Use correctly sharpened saw blades;
● Observe the maximum speed marked
on the saw blade;
●
Refrain from removing any cut-offs
or other parts of the workpiece from
the cutting area while the machine is
running and the cutting head is not
in the rest position;
●
Ensure that the machine is always
fixed to a bench, whenever possible.
Содержание SM2509R
