REX MANTIS 120A, Руководство по эксплуатации

Страница: 4 / 23

(1) Make sure the voltage is correct.
Be sure to use the rated voltage displayed on the label on the unit or in the Operation Manual. Using other voltages may
produce heat, smoke or fire.
(2) Check to make sure the ON/OFF switch is in the "OFF" position before plugging in the unit.
Plugging in the unit with the ON/OFF switch in the "ON" position will cause the unit to begin operating unexpectedly,
possibly resulting in accident or injury. Always check to make sure that the ON/OFF switch is in the "OFF" position before
plugging in the unit.
(3) Be careful of electrical shock.
Do not touch the plug with wet hands.
Do not use the unit in the rain or in other situations in which water may get inside the machine.
Be sure to ground the unit. Failure to do so may result in electric shock.
(4) Check to make sure the workplace is safe.
Do not use this product in the rain or in humid or wet locations, or in any other situation in which water may get inside the
unit. Exposure to humidity may also degrade the motor insulation and lead to electrical shock.
Do not use this product near gasoline, paint thinner or other flammable liquids or gases. Failure to observe this precaution
may result in fire or explosion.
(5) Use only the recommended accessories and attachments.
Do not use accessories and attachments other than the recommended ones listed in the Operation Manual and REX
catalogues as doing so may result in accident or injury.
(6) In the event of any of the following, turn the ON/OFF switch to the "OFF" position and
unplug the unit.
When the unit is not in use, or when replacing parts, performing repairs, cleaning or inspection.
When changing accessories.
In other potentially dangerous situations (including a power outage)
If the unit is left plugged in, it may operate unexpectedly, leading to accident or injury.
(7) Turn the unit off in the event of any abnormality.
Turn off the unit immediately if it seems to be operating strangely or vibrates, or if you detect an unusual noise or odor.
Use the table in the "Troubleshooting" section of this manual to determine the cause of the problem and then take the
appropriate action. Continuing to use the unit when it is operating abnormally may result in heat, smoke or fire and may
lead to accident or injury.
In the event that the unit heats up or produces smoke, do not attempt to disassemble it yourself. Have it inspected and
repaired by an authorized repair technician.
(8) Maintain safety by keeping the workplace neat and clean.
Make every effort to keep the workbench and work area neat and clean, and make sure the area is well lit.
A messy work areaand workbench may lead to accidents.
(9) Keep unauthorized personnel away from the work area.
Do not allow unauthorized personnel to touch the unit or cord, or operate the machine.
Make sure only authorized work personnel are allowed to enter the work area. Be particularly careful of children entering
the area during work operations. Failure to observe these precautions may result in injury.
(10) Use the tool properly.
Do not use this tool for anything other than its intended purpose. Using it for other purposes, or for jobs that exceed its
capacity, may result in damage to the tool and/or accident or injury.
Do not use the tool for operations beyond its capacity that may cause the motor to lock. This may result in smoke or fire.
(11) Wear proper clothing.
Do not wear neckties, clothing with open sleeves, baggy clothing or necklaces or other accessories when operating the unit.
Fasten all buttons, zip fasteners etc. on your clothing before beginning any operation. Failure to observe these precautions
may result in clothing getting caught in the unit's moving parts, resulting in accident and serious injury.
When working outdoors, the use of rubber gloves and slip-proof footwear is recommended. Wearing slippery gloves and
footwear may result in injury.
Put long hair inside a cap or hair cover. Do not wear a muffler, etc. during work operations. Long hair, mufflers and the like
may get caught in the unit's moving parts, leading to accident and serious injury .
Depending on the work environment, it may also be necessary to wear a safety helmet and work boots.
Safety Considerations
- 1 -