REX MANTIS 120A Скачать руководство пользователя страница 20

Страница: 20 / 23

・

Check the blade.

・

Check to make sure the blade is not chipped or

otherwise damaged. If it is, replace it.

・

I f the blade becomes worn, replace it as soon as

possible. C ontinued use of a worn blade may result
in slanted cutting.

・

Check all bolts.

・

Make sure all bolts are fastened tightly. Tighten any

that need it.

・

Check the power cord and plug.

・

Check the power cord and plug for damage. If the cord

is damaged, replace it.

・

Inspect the "SELI" heads.

・

Check to make sure that both "SELI" heads are

adjusted properly.

・

Check to see if the "SELI" head bearings are worn.

If they are, replace them.

・

Keep the unit clean.

・

Using a cloth or rag, periodically wipe away any chips,

dust and so on from the frame and pulley sections.

Note: Be careful not to get the motor wet.

2. Maintenance of Parts

(Fig. 36)

Maintenance

This unit is a precision instrument. If it fails to function properly, do not try to repair it yourself. Contact your local
REX dealer , sales office or distributor.

If you have questions or need parts or other supplies, feel free to contact

REX Industries Co., Ltd

Servicing & r epair

Replace blade

Inspect the "SELI"

Inspect power cord and plug

・

Inspect all bolts

・

Clean

Fig. 36

- 17 -

Содержание MANTIS 120A
























Результаты поиска

Содержание MANTIS 120A

Отзывы:

Похожие инструкции для MANTIS 120A

Бренды по названию

Популярные бренды

REX MANTIS 120A, Руководство по эксплуатации

Результаты поиска

Содержание MANTIS 120A

Отзывы:

Похожие инструкции для MANTIS 120A

Бренды по названию

Популярные бренды