REX MANTIS 120A, Руководство по эксплуатации, Страница: 14 / 23

Preparing for Cutting
Fig.18
Fig. 19
XB120A Flat Vice
(Figs.18
‑
22
）
How to move Plate B
（
Fig.18
）
Turn the vice knob anti-clockwise to release the lock.
Move the vice knob back and forth and you can quickly
move Plate B.
Right angle cuts (90 ° )
Place the workpiece in the vice carefully
aligning it with Plate A. （ Fig.19 ）
Note: Position the workpiece so that there is no abrupt change in the
thickness of the material being cut. （ Fig. 20 ）
If there is a sudden change in the thickness of the material while
cutting, the blade may be damaged, the cut may not be straight
or the motor may lock.
Push in the vice knob and move Plate B up against the
workpiece.
（
Fig. 19
）
Turn the vice knob clockwise and fix the workpiece securely
in position.
Note: Make sure the workpiece is flush with the base of the vice or
the cut will not be straight.
Cutting at an angle (0 〜 45 °）
Loosen the 2 bolts on Plate A with the socket wrench
supplied with the machine. (Fig. 21)
Set Plate A at the desired angle on the scale and tighten
the bolts firmly. (Fig. 22)
Fasten the workpiece in the same way as making 90
°
cuts.
Fig. 22
Fig. 21
Correct orientation for clamping workpieces
Fig. 20
Set the desired
angle on the scale
- 11 -
Vice knob
Plate B
Plate A
Turn to
release the lock
Place the workpiece firmly against Plate A
Lock
Move Plate B firmly
against the
workpiece
Socket wrench
（
standard accessory
）
Locking bolts
Flat Vice