(1) Keep away from the blade when it is rotating.
Even after the unit has been turned off, the blade will continue to turn due to inertia. NEV ER TOUCH THE BL ADE OR MOV ING
PARTS WHIL E THEY AR E IN MOTION. You may get caught in the mechanism, resulting in accident or serious injury.
(2) Do not wear gloves while operating the unit.
If gloves are worn during the cutting operation, they may become caught in the moving parts, leading to accident or injury.
Avoid wearing gloves while operating the unit.
(3) Do not touch the workpiece or blade with bare hands immediately after it has been cut.
Immediately after the cutting process, the workpiece and blade will be very hot. You may be burned if you touch them with
bare hands.
(4) Turn off the unit immediately in the event of an abnormality
.
Turn off the unit immediately and unplug it if it starts acting strangely, or if you notice any other abnormality during operation.
(5) Make sure the frame cover is in place.
To ensure safety during the cutting operation, always make sure the frame cover is in place when cutting. If the frame cover
is not in place, you may get caught in the blade or rotating parts, leading to accident or serious injury
.
(6) Install the unit on level ground and in a stable position.
Avoid installing the unit on an incline. Always install it on level ground. Failure to observe this precaution may result in the
unit toppling during operation, resulting in accident or injury
.
Be particularly careful of the unit toppling over when performing contour cutting. Check to make sure the frame will not
topple forward.
(7) Check to make sure the unit is turned OFF before changing the blade or clamping the workpiece.
Particularly when changing the blade, set the ON/OFF switch to the "OFF" position and unplug the unit before changing the blade.
(8) Make sure the frame does not drop down unexpectedly
.
Make sure the frame does not drop down unexpectedly, as this may damage the blade.
(9) Do not subject the unit to violent shocks.
This product contains precision parts that may be damaged if the unit is dropped, hit or otherwise subjected to shock.
Be particularly careful not to drop the unit during transport. This may result in damage to the machine or injury if it should
land on your foot, etc.
(10) Make sure that the voltage is correct.
Be sure to use a power supply with the proper voltage shown on the label. Using a power supply of a different voltage may
not only damage the motor but could also lead to injury
.
(11) Clamp the workpiece securely.
If the workpiece is not fastened securely in place, it may move during the cutting process. This may cause the tool to vibrate
or place excessive stress on the blade, resulting in breakage.
When cutting several workplaces at the same time, check to make sure that none of them move before beginning the cutting process.
(12) Use a blade of the recommended type that matches the material to be cut.
Select a blade that is appropriate for the material to be cut.
Use only the recommended blades.
(13) Use a cutting load setting that matches the workpiece.
Do not use a load setting that is too high or press the frame against the workpiece while cutting. This may cause slanted
cutting or result in blade chipping / breakage, or the motor locking or the like.
(14) Make sure the blade is attached securely
.
If the blade is not attached securely , it may come off during the cutting operation, resulting in accident or injury.
(15) Wipe off any oil from the blade or workpiece before cutting.
Before shipment from the factory, blades are coated with oil to prevent rust. Be sure to wipe away the oil before attaching
blades. Failure to do so may cause the blade to slip or come loose.
If there is any oil on the workpiece, be sure to wipe it off as well.
Do not apply cutting oil or the like to the blade during use.
Pr ecautions
- 3 -
Содержание MANTIS 120A
Страница 23: ...XB125 120 E4 0802R0200 S S ...
