Revolution 212158, Руководство пользователя

Страница: 9 / 32

GB
9
• Install the heating head and pan correctly.
Note : Due to the manufacturing residues, the appliance may
emit a slight odor in the first few cycles. This is normal and
does not indicate any defect or hazard. Make sure the appliance
is well ventilated.
Operating instructions
Attention
: DO NOT touch directly the pan and heating head.
Wear heat resistant gloves (not supplied) if necessary.
• Turn on the power switch and let the machine run for 1-2
minutes. If the machine needs adjusted, the machine will
shake. Please make sure the machine is running smoothly
before continuing.
• Turn on the heating switch and let the machine warm-up for
about 4-5 minutes.
• Pour one spoonful of the granulated sugar into the center of
the running head.
• The candy floss will form after roughly 30 seconds. Use a can-
dy stick or other related object for the candy floss to stick to.
Revolve the stick in a circular motion following the pan.
• To continue to make candy floss, repeat the above procedures.
• Once all candy floss has been gathered, put little water into
the heating head and repeat 4-5 times for cleaning inside.
• Turn off and unplug the machine for cleaning outside(see
----->Cleaning and Maintenance)
Note : Allow the motor to rest for 20 minutes after working con-
tinuously for an hour
Cleaning & Maintenance
ATTENTION!
Always disconnect the appliance from the elec-
trical mains and cool down before storage, cleaning & main-
tenance.
Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
Cleaning
• Never use abrasive sponges or aggressive detergents, steel
wool or metallic utensils to clean the heating area.
• Avoid the use of sprays as this may damage the heating area.
• Never immerse the appliance in water or any other liquid.
• This appliance should be cleaned regularly and any food de-
posit removed.
• Clean the surface of the heating area with a damp cloth (water
with mild detergent).
Storage
• Always make sure the appliance has already been discon-
nected from the electrical wall outlet and cooled down com-
pletely.
• Store the appliance in a cool and clean place.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems Possible cause Possible solution
Voltage meter is
abnormal. Heating
head and indica-
tors do not func-
tional
1. Power plug and
the outlet are not
connected firmly
1. Check again the
connections and make
sure they are firmly
connected
2. Fuse is blew out 2. Replace the fuse
3. Electrical com-
ponents are dam-
aged
3. Contact your sup-
plier
Voltage meter is
normal. Heating
head does not
functional but in-
dicators light on.
Heating element be-
comes defective.
Contact your supplier
Voltage meter is
normal. Heater
head is functional
but no indicators
light on.
Indicators becomes
defective.
Contact your supplier
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the product must not
be disposed of with other household waste. Instead, it is your
responsibility to dispose to your waste equipment by handing it
over to a designated collection point. Failure to follow this rule
may be penalized in accordance with applicable regulations on
waste disposal. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve nat-
ural resources and ensure that it is recycled in a manner that
protects human health and the environment.
For more information about where you can drop off your waste
for recycling, please contact your local waste collection compa-
ny. The manufacturers and importers do not take responsibility
for recycling, treatment and ecological disposal, either directly
or through a public system.