Revo 16 Channel, Руководство пользователя

Страница: 31 / 56

4, 8 &16 Channel Digital Video Recorder
25

Actions
: Set the actions the DVR will take whenever an input is detected on the
selected alarm input. Alarm-In event can sound the external alarm or DVR’s
internal buzzer, notify a number of different devices, and/or move PTZ cameras
to preset positions.
Alarm Out
– Select the alarm-out signals (Alarm-Out and Beep) to be associated with
the alarm input.
Notify
– Select Mail if you want to send an e-mail to the address set during
NETWORK – Mail
setup.
PTZ
– Select the preset position for each PTZ camera, where you want PTZ cameras to move to.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
System Event Settings (EVENT

System Tab)

Settings
: Set up the DVR to run self-diagnostics.
System
– Select the interval that you want the DVR to run
self-diagnostics on the system.
Check Recording
– Selecting the column allows you to set up
the check recording schedule by selecting
Schedule On
.
Selecting allows you to add a check recording schedule
by setting the day, time range and interval that you want the
DVR to run self-diagnostics on the recorder.
Selecting
allows you to delete a check recording schedule.
Check Alarm-In
– Selecting the column allow you to change
interval the DVR to run self-diagnostics on alarm inputs.
Disk Almost Full
– Select the percentage level of disk usage
at which you want the DVR to trigger an alert.
Disk Bad
– Select percentage level of bad disk sectors at which you want the DVR to trigger an alert.
Disk Temperature
– Set the temperature threshold and (ºC (Celsius) or ºF (Fahrenheit)). If the temperature of hard disk
drive exceeds the defined threshold, the system triggers an alert.

Actions
: Set up actions the DVR will take whenever it detects system events. System events can sound the DVR’s
internal buzzer, notify a number of different devices and/or move PTZ cameras to preset positions.
NOTE: The Alarm Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.

Beep on Video Loss
: Set to sound the DVR’s internal buzzer when video is lost.