Revere 45-CC2V, Руководство по обслуживанию, Страница: 18 / 226

SERVICE BULLETIN NO. 09/16
Sept 20/16
9102
SB - 8
5323 Highway Avenue
Jacksonville, FL 32254
(T) 904.503.9733
(F) 904.503.9719
SPECIAL TOOLS, FIXTURES AND MATERIALS:
The following are required during filling:
Aluminum protection cap
Filling tool complete.
Tool for diaphragm holder
Spare diaphragm holders
TBA Permanite GT P.F.T.E,
Technical alcohol
SCHEDULE OF OVERHAUL PERIODS:
Adapter: On condition or maximum 5 years.
ACCESSORIES:
1. Tool for diaphragm holder 005-657
2. Spanner for the adapter size 36/30 Commercial
3. Open spanner size 50 Commercial
4. Filling head DK 94/99 system CO
2
90-029
5. Seal kit DK 94/99 filling heads 90-029 pos. 2&5
6. Transport protection cap for DK94/99 system 90-039
7. Technical alcohol in 2.5 or 10 liter canister Commercial
CHARGING PROCEDURE
To ensure correct and equal charging and to protect the diaphragm against overload during
charging, the following procedure should be followed.
When starting charging, there is no pressure in the cylinder, i.e. under the diaphragm, but there is
a possibility of high pressure on top of the diaphragm.
The diaphragm holder can withstand a certain difference in pressure (Pressure drop) across it,
without getting damaged.
Damaged in this case means the diaphragm itself will dome downwards under influence of the
pressure on the topside. If the pressure is too high the doming can crack the seal ring or blow off
the diaphragm, which will create leak problems. This is particularly relevant for high pressure Air
filled bottles.