ITEM DESCRIPTION
The main features of walkie-talkie
Battery low power tips
Using the walkie-talkies
Select channel
CTCSS/DCS
Channel scan
5.Having a channel scan function.
6.24-hour time display.
7.Alarm reminders appear.
8.Backlit display.
9.Use BL-5B lithium batteries
1.A plurality of selectable channels.
2.Automatic squelch.
3.Auto save power.
4.It has an internal voice intercom
(speakerphone) function.
When the unit is low battery in the talk mode and standby mode, power indication
start Flashes. Remind you to recharge.
1.Press and hold the Power / Menu button about 3 seconds, the unit will power on to
speak mode, The display shows the icon under intercom mode.
2.Press the Power / Menu button to access the function settings.
Activated icon will begin blinking.
Press repeatedly this button, explore other menu functions until back to the intercom
mode. Every time you press the Power / Menu button, the function or icon will show
on the screen.
3.After activate a function icon, press the up or down key to select menu options.
4.Press PTT-button to save and back to standby.
1.When the radio is Standby, press the Power / Menu button again until the current
channel starts flashing on the LCD screen, you can change the Channel.
2.Press the up or down key to select the channel number.
3.Press the Power / Menu button to save the settings and return to the receiving status.
4.Press the PTT-button to save and return to the receiving status.
Select CTCSS/DCS which allows you to receive calls from members of the same group
(same mute code) issued, avoiding the same frequency interference from other users.
Note: CTCSS / DCS cannot make your talking content keep secret, it can only make you
unable to receive calls from other CTCSS / DCS users.
1.When standby, press the Power / Menu button twice, until the mute code of current
channel starts flashing, thus you can reset status of CTCSS/DCS.
Press the up key or down key to select the privacy code. Long press the up key or down
key to select the privacy code quickly.
2. Press the PTT / CALL to save the settings. Or press the power / menu button to enter
next function option.
Scan fucntion lets you scan all channels occupancy.
1.When standby, press the Scan button to activate scan function, the machine satarts to
scan all channel activities), when there are voices in scanned channel, it will stay 4~5s
in this channel, then continue to scan next channel.)
3
4
Notice:
This radio come with a dedicated charger, To avoid damage your radio and lithium ion
batteries, please do not use other chargers. Please do not transmit when charging.
The new battery should be charger around 12hours when use it first time..
Number Name
Description
Power/Menu
Button
PTT key
Up key
Down key
Scan/Lampe
Monitor/
Lock button
MIC
Speaker
Antenna
USB Interface
It is a walkie-talkie headset jack.
It is a walkie-talkie lights.
Earpiece Jack
Flashlight
LED
It is a walkie-talkie LED.
It is a walkie-talkie charging interface.
Enhanced signal reception and emission.
Built-in microphone.
Built-in speaker.
Use this button to adjust volume or function setting
choosing.
Use this button to adjust volume or function setting
choosing.
Long press to enter the scanning channel, short
press to enter the illumination.
Long press to enter the inter-lock, short press enter
monitor function.
Long press this button can open / close radio; short
press to enter the radio function setting.
Press and hold this button to transmit information
quickly press twice to send calling sound.
1
2
3
4
5
6
7
8
9
10
11
12
13
