Response Biomedical RAMP READER, Руководство пользователя

Страница: 9 / 54

Introduction
Operator’s Manual, RAMP
®
Reader
6
1.6 Unpacking and Installation
1.6.1 Unpacking
The Reader and/or optional accessories are packed in a cushioned container for maximum protection
during shipment. If the shipping container is damaged, inspect the Reader as it is unpacked. If the
Reader is damaged, notify the carrier and your distributor, or Response Biomedical Corporation to
arrange for immediate repair or replacement. Retain the shipping container and all packaging
material for repackaging.
To unpack the Reader, remove the packaging and carefully lift out the Reader. Place the Reader on
a dry, clean, level surface. Remove the AC Adapter and Power Cord and check the label to confirm
country-specific voltage requirements. Remove remaining contents and compare with the packing
slip or list below. If any of the contents are missing, contact your distributor or Response Biomedical
Corporation Customer Service (Appendix C).
1.6.2 RAMP
®
Reader Contents
Quantity Instrument
1 RAMP
®
Reader
1 Reader AC Adapter with adaptable plug
(region-specific)
1 Reader Operator’s Manual
1.6.3 Optional Accessories Contents
Quantity Optional Accessories
1 Printer (with associated accessories)
1 Barcode Wand
1 Computer Connection Cable
1 Reader-to-Reader Cable
1.6.4 Installation
The Reader should be plugged in prior to use in order to charge the battery. Connect the AC Adapter
to the Input Port on the back panel of the Reader (Figure 1-2) and plug into an AC outlet. It requires
24 hours to fully charge the battery but it can be used for testing while it is charging.
NOTE: Do not connect or disconnect the Reader from an AC outlet while a test is in
progress.
WARNING! Only use the charger provided with your RAMP
®
Reader.