RAMP
® System Operation
Operator’s Manual, RAMP
®
Reader
20
Press [Enter] to select 1. OUTPUT RESULTS. The screen displays the following prompt:
The three result types available to select are:
1. Sample Results 2. LQC Results 3. IQC Results
Press [▲] or [▼] until the desired option is displayed. Pressing [Options] will switch the display back
to the OPTIONS Menu.
Press [Enter] to select the specified option. The screen displays the following prompt:
To output all stored results press [Enter]. All the results in the memory will be sent to the printer.
The results are sent to the computer or printer (see example below) and the following message is
displayed:
To output only selected results, press [▼] to choose Selected Results.
Press [Enter]. The following message is displayed:
NOTE:
If only one result is stored, the Reader will display OUTPUT LAST TEST RESULT.
The Reader defaults to outputting the last two test results. Press [▲] or [▼] until the number of
results to be output is displayed, then press [Enter]. Pressing [Options] will return the Reader to the
OPTIONS MENU.
NOTE:
A maximum of 500 sample results, 65 IQC results and 35 LQC results can be
stored in memory.
The results are sent to the computer or printer (see example below) and the SENDING RESULTS
message is displayed.
OUTPUT LAST 2
TEST RESULTS
SENDING RESULTS
> ALL RESULTS
SELECTED RESULTS
SELECT RESULT TYPE:
1. SAMPLE RESULTS
Содержание RAMP READER
Страница 11: ...Operator s Manual RAMP Reader Reader Figure 1 1 RAMP Reader Introduction 8...
Страница 12: ...Operator s Manual RAMP Reader Figure Reader Figure 1 2 RAMP Reader Rear Panel View Introduction 9...
Страница 14: ...Operator s Manual RAMP Reader RAMP System Operation Reader Figure 2 1 RAMP Reader Keypad System Operation 11...
