Response Biomedical RAMP READER, Руководство пользователя

Страница: 17 / 54

RAMP
® System Operation
Operator’s Manual, RAMP
®
Reader
14
2.4 Running an Assay
2.4.1 Entering User ID
If the User ID option is enabled, the following screen is displayed after pressing [Enter] at the
RUN/OPTIONS prompt:
If the User ID option is disabled, this screen does not appear and the test proceeds to Sample ID
entry after pressing [Enter] (Section 2.4.2).
NOTE: The default for the User ID option is ENABLED. For information on how to enable /
disable the User ID via the SYSTEM SETTINGS Menu, see Section 2.6.4.
When the “>” cursor is pointing to the SELECT USER ID prompt, press [Enter]. The following prompt
is displayed:
Use the [▲] or [▼] keys to display the appropriate User ID and press [Enter] to select. The Reader
then progresses to the ENTER SAMPLE ID: (Section 2.4.3). The Reader provides up to 250 USER
ID’s of up to 20 characters each. The default entries for User ID’s are USER001, USER002, through
to USER250. To edit the User ID’s, see Section 2.6.5.
To return to the SELECT USER ID/ENTER USER ID screen without selecting a displayed User ID,
press [Options].
To enter a User ID from the keypad, press [▼] to move the “>” cursor to ENTER USER ID and press
[Enter]. The following screen is displayed:
Use the keypad to enter up to 20 alphanumeric characters. The screen limits the number of
characters to a maximum of 20.
Alternatively, use the optional Barcode Wand to enter the User ID. If the Barcode Wand is attached,
a loud beep will sound when the ENTER USER ID prompt is displayed.
Press [Enter] to accept the information entered by the keypad or Barcode Wand. This will link the
User ID to the Sample ID entered in the next step.
If there no characters entered, pressing [Options] returns the screen to the SELECT USER ID menu.
ENTER USER ID:
_
SELECT USER ID:
USER001
> SELECT USER ID
ENTER USER ID