Response Biomedical RAMP READER, Руководство пользователя

Страница: 21 / 54

RAMP
® System Operation
Operator’s Manual, RAMP
®
Reader
18
NOTE: If sample flow is not detected within the time specified by the Lot Card, the
following message is displayed, with the bottom line alternating display with “REMOVE
CARTRIDGE…” (Section 4.4).
When the sample flow is detected within the proper time interval, a double-beep is emitted, SAMPLE
FLOW DETECTED is displayed, followed by:
Development time is displayed as a countdown timer. The time interval is analyte-specific. Once the
development time countdown reaches 0 seconds, the Cartridge is scanned and the following
message is displayed:
WARNING! To reduce the risk associated with inaccurate results, keep movement of the
Reader to a minimum while an assay is in process, however sitting the Reader in an idling
or moving vehicle should not inhibit the development of a test.
At the conclusion of the test, the Cartridge is ejected and should be removed from the Reader. If auto
print is selected, the result will automatically be printed (Section 2.6.6). The results and associated
Sample ID are displayed, as in the following example:
The top line alternates from Sample ID (“ID: Patient”) to “PRESS ENTER to Cont.”, every 2 seconds
until either the [Options] or [Enter] is pressed.
To view the Test Date/Time and Lot Identification, press [Options].
The top line alternates from the Test Date/Time (“23 Jun 2015 – 19:19”) to “PRESS ENTER to Cont.”
until either the [Options] or [Enter] is pressed.
To re-display the Sample ID and test results, press [Options] again.
23 Jun 2015 – 19:19
Lot: M0xxxx
ID: Patient
TnI: 0.40 ng/mL
TEST: TnI
SCANNING **********
TEST: TnI mm:ss
DEVELOPING: 00:00
SAMPLING ERROR #2
SEE INSTRUCTIONS