– 8 –
System Overview (cont’d)
Device Timers
The system provides up to 20 "timers" that can be used to control various
devices, such as lights or appliances. These timers are similar in concept to the
individual appliance timers that might be purchased at a department store. The
devices that can be controlled are programmed into the system by the installer.
Up to 96 of these devices can be programmed. Refer to the
Programming Device
Timers
section for procedures.
To Access another Partition (GOTO Command)
Each keypad is assigned a default partition for display purposes, and will show
only that partition's information. But, if the user is authorized, a keypad in one
partition can be used to perform system functions in another partition, by using
the GOTO command. Note that only those partitions authorized and programmed
by the installer can be accessed in this manner.
To GOTO another partition, enter your security code, then press
[
∗
]
followed by
the desired partition number (1-8).
The keypad will remain in the new partition until directed to go to another
partition, or until 2 minutes has elapsed with no keypad activity. Entering your
security code, pressing
[
∗
]
followed by
[0]
will return the keypad to its original
partition.
Master Keypad Operation
A "Master" keypad is one on which the status of all eight partitions is displayed
simultaneously. A user can get more information about a certain partition by
simply entering
[
∗
]
+ the desired partition number (1-8). To log on to the
"Master" partition (9) using the
GOTO
command, and to perform any functions at
a Master keypad, a user must have access to all partitions.