resideo V250FBPT Скачать руководство пользователя страница 23

Страница: 23 / 80

– 23 –

Accessing Other Partitions

To Access another Partition

Each keypad is assigned a default partition for display purposes, and will show

only that partition's information. But, if the user is authorized, a keypad in one

partition can be used to perform system functions in other partitions by using the

GOTO

command. Note that only those partitions authorized and programmed by

the installer can be accessed in this manner.

To GOTO another partition:

READY

1. Enter your security code, then press * + partition number (0-8).
Entering partition number 0 will return the keypad to its original partition.

LOG-ON TO AAAA

PART. X COMPLETE

The keypad will remain in the new partition until

directed to go to another partition, or until 2

minutes have elapsed with no keypad activity.

AAAA = alpha descriptor programmed by the

installer

X = partition number

Global Arming

The Global Arming option may be assigned for use by some users. If Global

Arming was enabled for use with your security code, a keypad prompt (message)

shown below appears after pressing one of the arming function keys (STAY,

INSTANT, AWAY, MAXIMUM, OFF).

ARM P 1 2 3 4 5 6 7 8

HIT 0-8 X X X - - X - -

The prompt displays all the partitions. The user may

only arm/disarm the partitions they are assigned

access to.

To select the partition(s) that are to be armed, enter

the desired number 1-8. An "X" will appear under

that partition. Entering a partition's number again will

delete the “X” and that partition will not arm when

this prompt is exited.

Pressing 0 will turn all partitions the user is assigned

access to on/off.
When completed, press

∗

to exit. All the partitions

with the “X” will then arm/disarm.

Содержание V250FBPT

















































































Результаты поиска

Содержание V250FBPT

Отзывы:

resideo V250FBPT, Руководство пользователя, Страница: 23 / 80

Результаты поиска

Содержание V250FBPT

Отзывы: