resideo V250FBPT Скачать руководство пользователя страница 20

Страница: 20 / 80

– 20 –

Security Codes and Authority Levels (cont’d)

MULTI-ACCESS ?
0 = NO , 1 = YES

If you as a user have access to other partitions, the

keypad will prompt for ability of this new user to

access (GOTO) those partitions. Press 0 (NO) or 1

(YES). If no, the system activates this user code and

exits “Add a User” mode. If yes, the keypad prompts

for the Global Arm option for this user.

GLOBAL ARM ?
0 = NO , 1 = YES

Press 1 (YES) if this user will be allowed to try to arm

more than one partition at the same time. Press 0 if

this user will arm only his assigned partition.

PART.2 - SHOP?
0 = NO , 1 = YES

The keypad now prompts for the user’s access to the

next partition (see GOTO command). Again press 0 or

1. If yes, the system will automatically assign a user

number for use in that partition and will prompt for

authority level and global arm options for this user

within the partition (see previous steps).

PART. 1 A0* WHSE
USER 003 AUTH=3G.

When all partitions have been displayed, the keypad

will scroll through the partition(s) to which access has

been assigned, and will display the user number,

authority level and global arm option for each. The

“G” after the authority level indicates that the global

arm feature is active for this user in the displayed

partition. The "*" indicates the partition from which

this user can be changed or deleted. The "." at the

end of the second line indicates that this user sends

open/close reports. Open/close reporting is

automatically active for any users added by you, if

you have open/close reporting active.

Содержание V250FBPT

















































































Результаты поиска

Содержание V250FBPT

Отзывы:

resideo V250FBPT, Руководство пользователя, Страница: 20 / 80

Результаты поиска

Содержание V250FBPT

Отзывы: