resideo V250FBPT Скачать руководство пользователя страница 47

Страница: 47 / 80

– 47 –

Using Schedules (cont’d)

Programming Temporary Schedules

Temporary schedules only affect the partition from which it is entered. Temporary

schedules can be reused at later dates simply by scrolling (by pressing #) to the

DAYS? prompt (described below) and activating the appropriate days. This

should be considered when defining daily time windows. Note that only users

with authority level of manager or higher can program temporary schedules.

To program temporary schedules:

1. Enter your security code.
2. Press the # key followed by

3. The following prompts will appear.

MON DISARM WIND.

07:45AM 08:45AM

The cursor will be positioned on the tens of hours

digit of the start time for Monday's disarm window.

Enter the desired hour. Press * to move to the

minutes field. The minutes are entered in the same

manner. The AM/PM indication is changed by

hitting any key, 0-9, while the cursor is under the

letter A/P position. Repeat for the stop time entry.

Press the

∗

key to move to the arming window for

Monday.

Press # to move to the next screen display without

making changes.

MON ARM WINDOW

07:45AM 08:45AM

The cursor will be positioned on the tens of hours

digit of the start time for the arm window. Repeat

the previous steps to enter the start and stop time

for Monday's arming window.

TUE DISARM WIND.

07:45AM 08:45AM

After the windows for that day have been

completed, the system will prompt for disarm and

arm time windows for the next day. Repeat the

procedure for all days of the week.
When all of the days have been completed, the

system will ask which days are to be activated.

Содержание V250FBPT

















































































Результаты поиска

Содержание V250FBPT

Отзывы:

resideo V250FBPT, Руководство пользователя, Страница: 47 / 80

Результаты поиска

Содержание V250FBPT

Отзывы: