– 50 –
Programming Device Timers (cont’d)
00 ON TIME ?
00:00 PM
Enter the time you want the device turned on using
00:01 - 11:59 format. When the display shows the
desired time, press the
∗
key to move to the AM/PM
field. Press any key 0-9 to change the AM/PM
indication.
Enter 00:00 if this timer is not being used to turn
something ON for the days selected below. (Ex.
using one timer to turn lights on one day and using
another timer to turn them off on another day).
00 OFF TIME ?
00:00 PM
Enter the time you want the device turned off using
00:01 - 11:59 format. When the display shows the
desired time, press the
∗
key to move to the AM/PM
field. Press any key 0-9 to change the AM/PM
indication.
Enter 00:00 if this timer is not being used to turn
something OFF for the days selected below. (Ex.
using one timer to turn lights on one day and using
another timer to turn them off on another day).
00 DAYS? MTWTFSS
HIT 0-7 X X
Select the days on which the device is to be
activated by entering 1-7 (Monday = 1). An "X" will
appear under that day, indicating the output for that
day is active. Entering a day's number again will
deactivate that day. Pressing 0 will turn all days
on/off. The outputs will only be in effect for the days
that have the letter x underneath them. As the week
progresses, the days are reset to the inactive state,
unless the permanent option is selected (next
screen prompt). When completed, press
∗
to
continue.
00 PERMANENT ?
0 = NO, 1 = YES 0
Answering 1 (YES) means the system executes this
timer continuously. Answering 0 (NO) means the
system executes each day's output only once.