– 61 –
Trouble Conditions (cont’d)
•
A display of "
COMM. FAILURE
" at the Keypad indicates that a failure has
occurred in the telephone communication portion of your system. CALL FOR
SERVICE IMMEDIATELY.
•
A display of "
SYSTEM
LO BAT
", accompanied by a once per minute
"beeping" at the Keypad indicates that a low system battery condition exists.
CALL FOR SERVICE IMMEDIATELY.
•
A display of "
LO BAT
" and a zone descriptor, accompanied by a once per
minute "beeping" at the Keypad indicates that a low battery condition exists
in the wireless transmitter displayed. CALL FOR SERVICE IMMEDIATELY.
•
A display of "
MODEM COMM"
indicates that the control is on-line with the
central station's remote computer. The control will not operate while on-line.
•
A display of
“HSENS”
and a zone number indicates a smoke detector with a
high sensitivity level, which may cause false alarms. CALL FOR SERVICE
IMMEDIATELY.
•
A display of
“LSENS”
and a zone number indicates a smoke detector with a
low sensitivity level. Detectors with a low sensitivity might not detect a smoke
condition. CALL FOR SERVICE IMMEDIATELY.
Power Failure
If the message "
AC LOSS
" is displayed, the Keypad is operating on battery
power only. If only some lights are out on the premises, check circuit breakers
and fuses and reset or replace as necessary. CALL FOR SERVICE
IMMEDIATELY if AC power cannot be restored.
SERVICING INFORMATION
Your local Resideo dealer is the person best qualified to service your alarm
system. Arranging some kind of regular service program with him is advisable.
Your local Resideo dealer is:
Name:
Address:
Phone: