resideo Total Connect Box, Руководство пользователя

Страница: 9 / 19

9
Understanding the system tones
*Can be set to silent mode depending on configuration.
** Defined during install
TOTAL SET
ARMING
Sequence of 3 modulated
sounds.
Duration: 4 seconds
When arming total set,
confirms that the control panel
has received a valid code or
TAG and is preparing to arm
total set.
PARTIAL SET
ARMING*
ANNEX SET
ARMING
Sequence of 2 modulated
sounds.
Duration: 2, 5 seconds
When arming the partial or
annex set, confirms that the
control panel has received a
valid code or TAG and is
preparing to arm partial or
annex set.
EXIT DELAY
Upon arming...
One double beep per second
followed by faster double beep
for 10s and then 2s continuous
beep.
Total and annex set arming:
beeps continue until final exit
door is closed.
Partial* set arming: beeps
continue for 30 seconds** until
partial set is armed.
ARMING
COMPLETE
After closing the final door.
Three fast beeps
When closing the final exit door,
confirms that the system is
armed.
ENTRY DELAY
Upon entry...
One double beep per second
followed by faster double beep
for 10s and then 2s continuous
beep.
This entry tone lasts for
30 seconds** after you open the
entry door. You should disarm
your system within this time.
DISARMING
Long and continuous beep
Duration: 2, 5 seconds
When Disarming, confirms
that the control panel has
been successfully disarmed.
FAULT
2 times 7 fast beeps.
This signal indicates a fault
in the system.
ALERT
4 beeps upon alert...
sent via the keypad
Confirms the transmission of
an alert to the alarm company.