resideo Total Connect Box, Руководство пользователя

Страница: 16 / 19

ADVANCED OPERATIONS .
16
Device remote control
This function allows you to control remote devices such as smart plugs.
To control a remote device using the TCC keyfob:
If this has been configured by the installer, you can control up to 4 household appliances,
the default is 2.
The Control button
controls the first appliance (receiver 1).
•
The 3 lights blink until the request has been accepted by the system, and then
remain lit for 3 seconds.
The Control
and Partial Arm
buttons control the next appliance (receiver 2).
•
Lights 1 and 2 blink until the request has been accepted by the system and then
remain lit for 3 seconds.
Adjusting the beep level (GKP keypad)
To adjust the beep level on the GKP keypad:
1.
Press and hold the “1” and “3” keys simultaneously more than 2 seconds to enter user
programming mode. A double beep is played and all LED light on.
2. Keep pressing the key to select the device that you wish to adjust (each device
will emit a beep when it is selected). Example: If you want to adjust the beep level for
device 2: press the key twice. Device 2 will emit a beep to confirm its selection.
All LEDs start flashing.
3. Enter a beep level from 1 to 7 (1 = min, 7 = max). The device selected will emit a beep
to confirm the beep volume.
4.
Press the “B” key to exit user programming code and save you changes.
After a few seconds, a double beep is played and all LED stop flashing.