resideo Total Connect Box, Руководство пользователя

Страница: 5 / 19

5
Introduction
This manual describes how to use your Total Connect
Box alarm system and what you should do in the event
of an alarm. It is task based and is divided into two
sections covering basic and advanced operations.
Basic operation includes arming and disarming your
alarm system, and if you only ever perform these tasks,
then you need not read past the first few pages of the
manual.
However, if you want to assign TAGs or codes to users, or bypass detectors,
then read on to the Advanced operation part of the manual.
To help keep your Total Connect Box alarm system in good condition, please read the
Maintenance and recommendations section at the end of the manual.
Your system will comprise a wall mounted control panel, a number of detectors and
sensors fitted during installation, and it will also include one or more of the following
devices for arming/disarming and system configuration:
GKP keypad TCC keyfob Keytag (TAG)
Wireless keypad (GKP)
This is a wall mounted keypad with an integrated siren and status LEDs, primary intended
for arming and disarming. It can be used for some advanced operations.
Your installer will provide you with a master TAG and a 4 or 6-digit master code to use
with your keypad. You will need this to modify other users' codes and TAGs, and other
more advanced user functions
The keypad can be used to arm and disarm your security system, using any valid access
code or keytag (TAG).