resideo Total Connect Box, Руководство пользователя

Страница: 13 / 19

BASIC OPERATIONS .
13
Duress code
If you are forced to disarm your security system under duress, enter your duress code
using a keypad. Your duress code is your access code with the last digit incremented
by 1, for example 1234 becomes 1235, and 6789 becomes 6780.
The system will disarm as normal, however a silent alert signal is transmitted to your
alarm receiving centre (depending on the configuration).
Sending an SOS
You can send an instant personal attack alarm whenever you feel threatened while
at home, even when your system is not armed.
To send an SOS:
Note: you can send an SOS using the GKP keypad or the TCC keyfob.
•
Press the SOS buttons together.
•
An alarm is sent to the alarm company
•
The siren is triggered (depending on your system
configuration)
TCC: +
GKP: +
Resetting the system after an alarm
Caution: Stopping the siren does not interrupt the transmission of the alarm to
the alarm company.
If the LEDs flash slowly on your control panel, an alarm has occurred. When an alarm
is in the memory, the system cannot be armed until it has been reset.
To reset the system using the GKP keypad:
or
Enter your 4 to 6-digit
user code (provided by
your installer)
If there is more than one alarm in the memory, repeat this operation for each alarm until
all LEDs are off.
If the right-hand LED is flashing quickly on your alarm panel, a confirmed alarm has
occurred and you will need to call your alarm company to perform a reset. Until then
you will not be able to arm the system.