resideo Total Connect Box, Руководство пользователя

Страница: 6 / 19

6
Protected zones
The Total Connect Box alarm system allows for the surveillance of up to three different
zones:
► Zone A = the perimeter or ground floor
► Zone B = the rest of the house
► Zone C = An optional area (annex)
Linked configuration: a second perimeter area or a garage.
Autonomous configuration: a studio or shop.
An access path can be associated with each area, allowing triggering of the alarm to be
delayed while the user enters or leaves the site.
The zones will be set by the installer. You should check with the installer how these zones
have been defined.
The following surveillance modes can be activated:
► Main area Surveillance (Total set) = Areas A + B (or Areas A + B + C depending on
your system settings) are protected
– you are absent from the site.
► Partial Surveillance (Part set) = only Area A is protected – you are present on site.
► Optional: Annex Surveillance (Annex set) = Only Area C is protected – you are
present on site.
Use Total set arming ( ) when you are away from home.
Use Part set arming ( ) when you are staying at home and want to arm the doors and
windows only.
Sensors
There are several different types of sensors that can be used with your Total Connect Box
system. The installer has selected the sensors that meet your requirements.
Intrusion detectors
Intrusion detectors are used to detect any undesired entry into protected premises.
There are two main categories of intrusion detectors, perimetric and volumetric.
Perimetric detectors
Perimetric sensors detect intrusion at possible entry points such as doors and windows.
An alarm is triggered as soon as an intrusion takes place. Perimetric sensors can be of
the following types:
•
Contact detectors detect the opening of doors or windows when the contact is
broken. They are located at the key possible entry points of the premises.