resideo Total Connect Box, Руководство пользователя

Страница: 14 / 19

BASIC OPERATIONS .
14
To reset the system using the TCC keyfob
1. On the keyfob, press the disarm button .
All three lights will blink slowly. The system does not reset in order to avoid beeps
that could attract the attention of an intruder.
2. Press the disarm button once more to confirm disarming.
The associated light will blink rapidly while communicating with the panel, then light
for 3 seconds to confirm that disarming is successful.
3. If the right-hand LED is flashing quickly on your alarm panel, a confirmed alarm has
occurred and you will need to call your alarm company to perform a reset. Until then
you will not be able to arm the system.
Incorrect code or invalid TAG
After five attempts to enter an incorrect code or use an invalid TAG, the keypad locks out
all users for 5 minutes.
Checking the alarm status
To check the alarm status using the GKP keypad:
On the GKP keypad, press a key and wait a few seconds. You may need to disarm
the system to activate all LED indicators. The LED indicators will show the status of
your security system:
•
The current arming status.
•
The fault status.
To check the alarm status using the TCC keyfob:
On the keyfob, press the control button for 1 second.
All three LEDs will light several times in succession; the LED for the current arming status will
remain lit for 3 seconds.