M30870T2-CPE User’s Manual
3. Usage (Emulator Debugger)
REJ10J0766-0400 Rev.4.00 February 16, 2006
4. RAM monitor area setting dialog box when RAM monitor area is changed from 400h to 1 block
5. RAM monitor area setting dialog box
Specifying the start address
You can set the start address of the RAM area to be
monitored. To add a RAM monitor area, click the "Add..."
button. The RAM Monitor Area Setting Window will be
displayed.
Changing the RAM monitor display area
You can change the manner in which the RAM monitor area
you have set in the above dialog box is displayed.
-
↑
Shows the blocks at the preceding addresses.
-
↓
Shows the blocks at the following addresses.
The background colors of the data display and the code
display sections change with the access attribute as
described below.
- Green Addresses accessed for read
- Red
Addresses accessed for write
- White Addresses not accessed
The background colors can be changed as necessary.
Page 78 of 102
