Renesas IE-703107-MC-EM1 Скачать руководство пользователя страница 73

Страница: 73 / 83

APPENDIX C CONNECTORS FOR TARGET CONNECTION

User’s Manual U14481EJ3V0UM

(2) When mounting device

Caution Check for abnormal conditions such as resin burr or bent pins before mounting a device on the

NQPACK144SD or NQPACK100SD. Moreover, check that the hold pins of the HQPACK144SD or

HQPACK100SD are not broken or bent before mounting the HQPACK144SD or HQPACK100SD

on top of the device. If there are broken or bent pins, fix them with a thin, flat plate such as a

blade.

<1> Make sure that the NQPACK144SD or NQPACK100SD is clean and the device pins are parallel (flat)

before mounting a device on the NQPACK144SD or NQPACK100SD. Then, after mounting the

NQPACK144SD or NQPACK100SD to the target board, fix the device and the HQPACK144SD or

HQPACK100SD (refer to

Figure C-2

<2> Using the screws provided with the HQPACK144SD or HQPACK100SD (four locations: M2

6 mm),

secure the HQPACK144SD or HQPACK100SD, device, and NQPACK144SD or NQPACK100SD.

Tighten the screws in a crisscross pattern with the screwdriver provided or a driver with a torque gauge

(avoid tightening only one screw strongly). Tighten the screws with 0.55 kg

⋅

cm (0.054 Nm) max. torque.

Excessive tightening may diminish conductivity.

At this time, each pin is fixed inside the plastic wall dividers by the contact pin of the NQPACK144SD or

NQPACK100SD and the hold pin of the HQPACK144SD or HQPACK100SD (refer to

Figure C-3

). Thus,

pins cannot cause a short with pins of neighboring devices.

Figure C-2. Mounting of Device

Fastening screws

HQPACK144SD or HQPACK100SD

NQPACK144SD or NQPACK100SD

Target system

Device

Figure C-3. NQPACK144SD or NQPACK100SD and Device Pin

Hold pin of HQPACK144SD or HQPACK100SD

Divider

Device

Contact pin of NQPACK144SD or NQPACK100SD

Содержание IE-703107-MC-EM1




















































































Результаты поиска

Содержание IE-703107-MC-EM1

Отзывы:

Похожие инструкции для IE-703107-MC-EM1

Бренды по названию

Популярные бренды

Renesas IE-703107-MC-EM1, Руководство пользователя

Результаты поиска

Содержание IE-703107-MC-EM1

Отзывы:

Похожие инструкции для IE-703107-MC-EM1

Бренды по названию

Популярные бренды