manualshive.com logo in svg

Renesas IDT Tsi574, Руководство пользователя

Поделиться
Скачать
Renesas IDT Tsi574 Скачать руководство пользователя страница 109

5. Multicast > Multicast Group Tables

109

Tsi574 User Manual

June 6, 2016

Integrated Device Technology

www.idt.com

3.

Write the 

“RapidIO Multicast DestID Association Register” on page 259

, setting the LARGE field 

to indicate whether the destination ID is an 8-bit or a 16-bit ID; and setting the CMD field to 11. 
This associates the destination ID to the list of ports that must receive copies of the packet. Note 
that there must be a 1:1 association between destination IDs and multicast masks. 

Ports can be removed from a multicast mask by writing the Multicast Mask Configuration Register, 
even when the mask is associated with a destination ID.

If a port that is powered down or detected as faulty is a part of a multicast mask, packets are still 
replicated and sent to that port. However, the port silently drops the packets.

Multicast groups can be deleted by breaking the association between destination IDs and multicast 
mask numbers through the 

“RapidIO Multicast DestID Configuration Register” on page 258

 and 

“RapidIO Multicast DestID Association Register” on page 259

.

To execute either of the previous two operations (port removal or group deletion), the system software 
must remember what port is associated to which multicast masks and to which multicast mask number 
the destination ID is bound. If the software designer selects not to maintain a state table, it is possible to 
determine what multicast mask a destination ID/TT value is associated with through the use of 
Write-to-Verify commands.

It is possible that a multicast mask has no ports selected, or the only port selected is the ingress port the 
original packet was received on. In this case, the multicast engine silently discards the packet. 

The following figure is a representation of the relationship between the destination ID, multicast group 
number, multicast vector, and egress port.

In alignment with the RapidIO multicast specification, if multiple destination ID association 
operations occur for a multicast mask, the last association operation executed determines 
which destination ID and TT value is associated with a multicast mask.

Содержание IDT Tsi574



































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды