manualshive.com logo in svg

Renesas IDT Tsi574, Руководство пользователя

Поделиться
Скачать
Renesas IDT Tsi574 Скачать руководство пользователя страница 101

101

Tsi574 User Manual

June 6, 2016

Integrated Device Technology

www.idt.com

5. Multicast

This chapter describes the multicast features of the Tsi574. It includes the following information:

•

“Overview” on page 101

•

“Multicast Behavior Overview” on page 104

•

“Multicast Group Tables” on page 108

•

“Multicast Work Queue” on page 105

•

“Broadcast Buffers” on page 105

•

“Error Management of Multicast Packets” on page 116

•

“Port Reset” on page 118

5.1

Overview

The Tsi574 multicast functionality is compliant to the 

RapidIO Version 1.3 Part 11 Multicast 

Specification

.

5.1.1

Multicast Operation

In a multicast operation, packets are received at the speed of any ingress port (up to 10 Gbits/s) and 
broadcast at the speed of the egress ports (up to 10 Gbits/s for a 4x mode port operating at 
3.125 Gbits/s) to multiple ports capable of accepting packets for transmission.  

Packets are routed to the multicast engine based on their destinationID and Transaction Type (TT) field 
value. If no match is found for the destinationID and TT field, then the ingress lookup tables are used to 
route the packet. A maximum of eight different DestID/TT field combinations can be routed to the 
multicast engine. Each destinationID/TT set can be multicast to a different set of egress ports. A set of 
egress ports that packets are multicast to is called a multicast group and is represented by the multicast 
mask in the group table. A multicast packet is never sent out on the port that it was received on. Any 
number of ports can share the same multicast group.

Multicast packets are accepted by egress ports based on priority. In the event that multicast and unicast 
traffic are competing for resources in the egress port, multicast specific egress arbitration can be used 
to favour multicast or unicast traffic. This allows a group of endpoints that need to multicast to each 
other to share the same multicast mask.

5.1.2

Features

The Tsi574 supports multicast packet replication in accordance with 

RapidIO Specification Version 

1.3, Part 11 Multicast

. 

Содержание IDT Tsi574



































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды