Renesas F-ZTAT H8S/2132F, Руководство пользователя, Страница: 76 / 95

Section 3 On-Board Programming
Rev. 2.00 Dec 13, 2004 page 66 of 82
REJ05B0520-0200
(9) Setting Up to Write User Data
Select WRITE from the menu shown in figure 3.8 to display the screen shown in figure 3.13.
Click OK from the screen shown in figure 3.13 to transfer user data without erasing a flash
memory block.
You can also click Cancel to close the dialog box and return to the Main Window without erasing
memory or transferring data.
Figure 3.13 Write Command Dialog Box
Description:
(a) Transfer user data to the F-ZTAT microcomputer. Specifying an address range transfers data
only to the specified range in flash memory.
(b) In the Filename field, specify the file containing the user data to be written to flash memory.
If you do not know the name of the directory containing the file, click Browse to display the
file selection dialog box and select the file to be written to flash memory.
(c) In the Starting address field, specify the starting address at which data is to be written to flash
memory. The default starting address is the start of flash memory.
(d) In the End address field, specify the ending address for writing data to flash memory.
(e) In the Offset field, specify the offset for the write address. Specify an offset if you want to
change the write address without changing the load address for the user data. If you specify an
offset, the offset is added to the load address for the user data when writing the data to flash
memory. The default offset is 0.