Renault EASY CONNECT, Инструкция по эксплуатации

Страница: 162 / 194

6.34
ENG_UD64020_3
Démarrage moteur à distance (XNX - Renault)
Special feature on vehicles
equipped with the function.
It is imperative that the vehicle is
driven for at least 10 minutes be-
tween each use of the function. Risk
of engine oil wear.
Incorrect
PIN
code entered
After three incorrect code entries:
– any remote starting requests will be
refused until the vehicle is unlocked
using the card/remote control;
– the system will send a notification to
your smartphone warning you that
remote starting is deactivated.
Note: to reactivate remote starting, you
must change your PIN code.
Changing the
PIN
code
To change your PIN code, please com-
plete the following steps:
– on vehicles equipped with a remote
control key, insert the key into the
starter ignition then turn the key posi-
tion to “ONˮ;
– on vehicles equipped with a card
press the “Start/Stop” button for
2 seconds without pressing the
pedals.
Note: it is not necessary to start the
engine in order to carry out this opera-
tion.
– select “Change PIN code” in the “MY
Renault” application;
– enter your new PIN;
– on vehicles equipped with a remote
control key, turn the key position to
“LOCKˮ;
– on vehicles equipped with a card
press the “Start/Stop” button for
2 seconds without pressing the
pedals.
REMOTE ENGINE START-UP (2/3)
In the 60 seconds following the change
of PIN code (depending on your vehi-
cle), carry out the following operations:
– on vehicles equipped with a remote
control key, insert the key into the
starter ignition then turn the key posi-
tion to “ON”;
– on vehicles equipped with a card
press the “Start/Stop” button for
2 seconds without pressing the
pedals.
Note:
– for more information on operating the
key or card, see Section 1 in your ve-
hicle user manual;
– an email will be sent to you each time
the PIN is changed;
– there is no need to start the engine in
order to carry out this operation.