9.2.2 Changing the parameters at installer level
Parameters
to
may only be modified by a recognised installer.
To prevent unwanted modifications to settings, some parameters can only
be changed after the special access code
is entered.
1. Press the two keys at the same time and then press the key
until the symbol flashes in the menu bar.
2. Select the installer menu using the
key.
appears on the display.
3. Use the or keys to set the installer code
.
4. To confirm, press the
key.
: appears with a flashing .
5. Press the
key again.
The value
°C (for example) appears and flashes.
6. Change the value by pressing the or keys. In this example,
press the key to set the value to
°C.
7. Press the
key to confirm the value.
: appears with a flashing .
8. Set any other parameters by selecting them using the or keys.
9. Press the
key twice to leave this menu and return to the opera
tion display.
Note
The boiler also returns to operating status if no keys are pressed
for 3 minutes.
9.2.3 Setting the maximum load for CH operation
M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
M Maximum heat input
F Factory setting
Q Load (Hi) (kW)
R Fan speed (rpm)
Fig.44 Inputting the access code
AD-0000076-01
3x
2x
Fig.45 Load Quinta Pro 30
AD-3000035-01
1500
2500
3500
4500
5500
6500
7500
0
20
R
Q
40
30
F
M
4100
Fig.46 Load Quinta Pro 45
AD-3000034-01
60
1500
2500
3500
4500
5500
6500
7500
0
20
R
Q
41
5600
F
M
Fig.47 Load Quinta Pro 65
AD-3000033-01
80
1500
2500
3500
4500
5500
6500
7500
0
20
40
R
Q
62
F
M
5800
9 Settings
123157 - v.06 - 24022015
49
