Caution
Modification of the factory settings may impair boiler operation.
9.2.1
Changing the user-level parameters
The parameters at user level (
to
) can be changed by the user as
required.
1. Press the two keys at the same time and then the key until the
symbol flashes in the menu bar.
2. Select the user menu using the
key.
: appears with flashing .
3. Press the
key again.
The set value
°C (for example) appears and flashes.
4. Change the value by pressing the or keys. In this example,
use the key to change the value to
°C.
5. Confirm the value with the
key.
: appears with flashing .
6. Press the
key twice to leave this menu and return to the opera
tion display.
Important
The other parameters at user level are changed in the same way
as
. After step 2, use the key to go to the required parame
ter.
9.2.2
Changing the parameters at installer level
Parameters
to
may only be modified by a recognised installer.
To prevent unwanted modifications to settings, some parameters can only
be changed after the special access code
is entered.
1. Press the two keys at the same time and then press the key
until the symbol flashes in the menu bar.
2. Select the installer menu using the
key.
appears on the display.
3. Use the or keys to set the installer code
.
4. To confirm, press the
key.
: appears with a flashing .
5. Press the
key again.
The value
°C (for example) appears and flashes.
6. Change the value by pressing the or keys. In this example,
press the key to set the value to
°C.
7. Press the
key to confirm the value.
: appears with a flashing .
8. Set any other parameters by selecting them using the or keys.
9. Press the
key twice to leave this menu and return to the opera
tion display.
Important
The boiler also returns to operating status if no keys are pressed
for 3 minutes.
Fig.45
Changing the user parameters
AD-0000075-01
1x
2x
Fig.46
Inputting the access code
AD-0000076-01
3x
2x
9 Settings
54
123157 - v.12 - 07022018
Содержание Quinta Pro 115
Страница 86: ...14 Appendix 86 123157 v 12 07022018 ...
